Hi Patrick and Alex,
The count down begins!!
We scheduled the installation crew as follows;
Friday 8/27 at 5:00 pm we will go there to unload and stage the cubicles
Saturday 8/28 at 7:00 am to begin installing the cubicles.
I believe Samson scheduled the data and electricians for Saturday at 1:00 PM
We should be done with the installation by 5:00 pm.
Please remember to tell you data people to use cable ties to secure the cables
running through the panels to avoid the kick plates from popping out of place.
You can click on any image to enlarge.
There will be:
(27) 6'x6' New fully loaded as shown in the picture above (to the far right)
(4) 60'x42" New Cubicles with only the panels / will use existing bases with new tops.
From Friant on the Winter gray color to match the rest.
(2) 60"x42" add on from surplus parts
(2) single 6'x6' add on. from surplus parts
(31) New ones from Friant
(4) Add on made from surplus materials
(35) Cubicles combined
We will use the table bases plus the mobile pedestals from the six pack
to furnish the (4) New Friant 60"x42" cubicles
We ordered (4) 29"x58" winter gray tops to match the other 27 cubicles.
For the other cubicles add on cubicles;
we are using a single cubicle from the area IT to make the (2) 6'x6's
I will bring our portable extractor and clean the soiled panel tiles.
Alex & Patrick,
None of the additional cubicles have been put on an estimate yet.
For (1) of the 6'x6' add on cubicles **UPDATE**
For (1) of the 6'x6' add on cubicles **UPDATE**
You already have:
(1) 48" wing panels with the window
(1) 24" panel
(2) 36" panels
(1) 36" white board
(1) Table 51"x29"
(1) 20"x72" Credenza Top
(1) lateral file
you have everything needed to add on to this cubicle cluster
For (1) of the 6'x6' add on cubicles **UPDATE**
For (1) of the 6'x6' add on cubicles **UPDATE**
You already have:
(1) 48" wing panels with the window
(1) 24" panel
(1) Table 51"x29"
(1) lateral file
We need the following:
(1) Frosty white 20"x72" credenza top
(1) 36" white board
(2) 36" panels (no need if we use the single 60" panel)
you have a single 60" panel on site we can use it but there will be no white board.
We will add on one more cubicle to these area if you see the cubicle on the back it is a single 5'panel so we can copy that look.
For the (2) 5'X42" add on cubicles **UPDATE**
For the (2) 5'X42" add on cubicles **UPDATE**
You already have the (2) 42" wing panels with the window
onsite they are disassembled and set aside
We will take one 5 feet panel and (2) tables from the 3 6'x5' cubicles that are going to be retrofitted to become 6'x6'. (see picture below)
we will use the existing surplus mobile pedestals and tables to complete the (4) cubicle add on job.
Surplus (6) 51"x29" tables
For the (3) 6'x5' cubicles RETROFIT **UPDATE**
For the (3) 6'x5' cubicles RETROFIT **UPDATE**
For this cubicles
in order to make them like the others
you need the following:
(4) 24" panels (NEED)
(4) 48" panels with windows (AT #360 Barneveld)
(3) credenza tops (NEED)
(3) lateral files (NEED)
(3) 29"x58" tops to retrofit the existing tables
not sure if you have them in your surplus.
(WILL USE EXISTING FROM THE 6 PACK)
We will need to cut dow existing 24"panels from the 6 pack
that Alex will send to the 360 Barneveld warehouse
I don't know how much it will cost yet.
We will invoice the material and shop charges after the job is completed.
My software don't have the steel case answer product line but you get the idea.
